BỘ KẾ
HOẠCH VÀ ĐẦU TƯ
|
CỘNG
HOÀ XÃ HỘI CHỦ NGHĨA VIỆT NAM
|
Số: 827 /2006/QĐ-BKH |
Hà Nội, ngày 15 tháng 8 năm 2006 |
BỘ TRƯỞNG BỘ KẾ HOẠCH VÀ ĐẦU TƯ
Căn cứ
Nghị định số 61/2003/NĐ-CP ngày 06/6/2003 quy định chức năng nhiệm vụ của Bộ Kế
hoạch và Đầu tư;
Căn cứ Nghị định số 158/2003/NĐ-CP ngày 10/12/2003 quy định chi tiết thi hành
Luật Thuế giá trị gia tăng và Luật sửa đổi, bổ sung một số điều của Luật Thuế
giá trị gia tăng;
Căn cứ Nghị định số 149/2005/NĐ-CP ngày 08/12/2005 quy định chi tiết thi hành
Luật Thuế xuất khẩu, Thuế nhập khẩu;
Căn cứ ý kiến của các Bộ, ngành liên quan.
QUYẾT ĐỊNH
Điều 1. Ban hành kèm theo Quyết định này:
- Danh mục thiết bị, máy móc, phụ tùng thay thế, phương tiện vận tải chuyên dùng trong nước đã sản xuất được để làm căn cứ thực hiện việc miễn thuế giá trị gia tăng theo quy định tại Mục 4 Điều 4 Nghị định số 158/2003/NĐ-CP ngày 10/12/2003 quy định chi tiết thi hành Luật Thuế giá trị gia tăng và Luật sửa đổi, bổ sung một số điều của Luật Thuế giá trị gia tăng.
- Danh mục vật tư cần thiết cho hoạt động dầu khí trong nước đã sản xuất được làm căn cứ thực hiện việc miễn thuế nhập khẩu theo quy định tại tiết b Mục 6 Điều 16 Nghị định số 149/2005/NĐ-CP ngày 08/12/2005 quy định chi tiết thi hành Luật Thuế xuất khẩu, Thuế nhập khẩu.
- Danh mục nguyên liệu, vật tư, bán thành phẩm trong nước đã sản xuất được làm căn cứ thực hiện việc miễn thuế nhập khẩu theo quy định tại Mục 16 Điều 16 Nghị định số 149/2005/NĐ-CP ngày 08/12/2005 quy định chi tiết thi hành Luật Thuế xuất khẩu, Thuế nhập khẩu.
- Danh mục nguyên vật liệu, vật tư, bán thành phẩm phục vụ cho việc đóng tàu trong nước đã sản xuất được làm căn cứ thực hiện việc miễn thuế nhập khẩu theo qui định tại Mục 16 Điều 16 Nghị định số 149/2005/NĐ-CP ngày 08/12/2005 quy định chi tiết thi hành Luật Thuế xuất khẩu, Thuế nhập khẩu.
Điều 2. Trong quá trình sử dụng Danh mục nếu có ý kiến không thống nhất giữa cơ quan Hải quan với doanh nghiệp thì cơ quan Hải quan phối hợp với các Sở Kế hoạch và Đầu tư địa phương xem xét để xử lý.
Trường hợp tiếp tục còn vướng mắc thì Tổng cục Hải quan kiến nghị Bộ Kế hoạch và Đầu tư xem xét quyết định hoặc sửa đổi bổ sung Danh mục.
Điều 3. Các danh mục ban hành kèm theo Quyết định này sẽ được xem xét bổ sung cho phù hợp với tình hình thực tế trên cơ sở đề nghị của các cơ quan quản lý nhà nước chuyên ngành.
Điều 4. Quyết định này thay thế cho Quyết định số 230/2000/QĐ-BKH ngày 04/5/2000 và Quyết định số 704/2003/QĐ-BKH ngày 18/9/2003 của Bộ trưởng Bộ Kế hoạch và Đầu tư đã ban hành và có hiệu lực sau 15 ngày kể từ ngày đăng Công báo.
|
Nơi
nhận: |
KT.BỘ TRƯỞNG |
|
FILE ĐƯỢC ĐÍNH KÈM THEO VĂN BẢN
|
|
THE MINISTRY OF
PLANNING AND INVESTMENT |
SOCIALIST REPUBLIC OF VIET NAM |
|
No. 827/2006/QD-BKH |
Hanoi, August 15, 2006 |
THE MINISTER OF PLANNING AND INVESTMENT
Pursuant to the Government’s Decree No.
61/2003/ND-CP of June 6, 2003, defining the functions, tasks, powers and
organizational structure of the Planning and Investment Ministry;
Pursuant to the Government’s Decree No. 158/2003/ND-CP of December 10, 2003,
detailing the implementation of the Value Added Tax (VAT) Law and the Law
Amending and Supplementing a Number of Articles of the VAT Law;
Pursuant to the Government’s Decree No. 149/2005/ND-CP of December 8, 2005,
detailing the implementation of the Law on Import Tax and Export Tax;
At the proposal of the concerned ministries and branches,
DECIDES:
Article 1.- To promulgate together with this Decision:
- The list of equipment, machinery, spare parts and special-use means of transport, which can be produced at home, to serve as a basis for VAT exemption according to the provisions of Section 4, Article 4 of the Government’s Decree No. 158/2003/ND-CP of December 10, 2003, detailing the implementation of the VAT Law and the Law Amending and Supplementing a Number of Articles of the VAT Law.
- The list of construction materials, which can be produced at home, to serve as a basis for VAT exemption according to the provisions of Section 4, Article 4 of the Government’s Decree No. 158/2003/ND-CP of December 10, 2003, detailing the implementation of the VAT Law and the Law Amending and Supplementing a Number of Articles of the VAT Law; and import tax exemption according to the provisions of Item e, Section 6, Article 16 of Decree No. 149/2005/ND-CP of December 8, 2005, detailing the implementation of the Law on Import Tax and Export Tax.
...
...
...
- The list of raw materials, materials, supplies and semi-finished products in service of shipbuilding industry, which can be produced at home, to serve as a basis for import tax exemption according to the provisions of Section 16, Article 16 of Decree No. 149/2005/ND-CP of December 8, 2005, detailing the implementation of the Law on Import Tax and Export Tax.
- The list of raw materials, materials, supplies and semi-finished products, which can be produced at home, to serve as a basis for import tax exemption according to the provisions of Section 16, Article 16 of Decree No. 149/2005/ND-CP of December 8, 2005, detailing the implementation of the Law on Import Tax and Export Tax.
Article 2.- In the course of using the lists, if customs offices’ opinions are different from those of enterprises, the customs offices shall coordinate with the provincial/municipal Planning and Investment Services in considering and handling such difference. If there remain any unsolved problems, the General Department of Customs shall propose the Planning and Investment Ministry to consider and make decisions or amend and/or supplement the lists.
Article 3.- The lists promulgated together with this Decision shall be considered and supplemented to suit the practical situation at the request of specialized state management agencies.
Article 4.- This Decision replaces Decision No. 230/2000/QD-BKH of May 4, 2000, and Decision No. 704/2003/QD-BKH of September 18, 2003, issued by the Planning and Investment Minister, and shall take effect 15 days after its publication in “CONG BAO.”
FOR THE PLANNING
AND INVESTMENT MINISTER
VICE MINISTER
Truong Van Doan
...
...
...
OF
EQUIPMENT, MACHINERY, SPARE PARTS AND SPECIAL-USE MEANS OF TRANSPORT, WHICH CAN
BE PRODUCED AT HOME
(Promulgated together with Decision No. 827/2006/QD-BKH of August 15, 2006
of the Planning and Investment Minister)
Ordinal number
Names of goods items
Codes under the Import Tariff
Specification signs and description of technical characteristics
Heading
Subheading
1
Plastic prepaid cards
...
...
...
90
99
For prepaid mobile phones
2
Conveyor belts of all kinds
4010
Of a width of up to 2,150 mm and a length of up to 100 m
...
...
...
Paper prepaid cards
4502
69
90
For prepaid mobile phones
4
High-tension electric poles of thermal zinc-coated steel
7308
20
...
...
...
For transmission lines of a voltage of up to 500 kV
5
Assorted metal scaffoldings, props, shuttering
7308
40
Of common type
6
Tanks
...
...
...
00
00
Of a capacity of up to 4,000 m3
7
Pressure tanks and tanks for compressed gas
7310
7311
7311
00
00
11
12
Up to 1,000 m3, working pressure of up to 100 at; with the multiplication product PV of less than 4,000
...
...
...
8
Assorted boilers (fuels: coal, gas, oil, sugarcane bagasse)
8402
12
Of an output of up to 25 tons/h, a pressure of up to 12 kG/cm2, a working pressure of up to 30 at
9
Internal combustion engines
8408
...
...
...
Of an output of up to 50 HP, diesel type
10
Ship axis and propeller (cast bronze)
8410
Propeller of a diameter of up to 2 m
11
...
...
...
8413
81
Up to Q = 32,000 m3/h, H = 30 – 40 m
13
Air compressors
8414
40
00
...
...
...
14
Industrial fans
8414
8414
8414
51
59
80
19
Up to 100,000 m3/h
...
...
...
15
Cyclones and furnaces
8416
Up to 3.5 m3/h
16
Equipment for production of assorted baked bricks
8416
...
...
...
Of an output of up to 20 million bricks/year
Equipment for production of pure ice
8418
Parameters of big machines: ice cube size of 48 x 80 mm, an output of 9-10 tons/hr or 400 kg/batch, power consumption level of 0.085 kwh/kg of ice, the compressor’s output of 50 HP
17
...
...
...
8418
50
22
Joined with Polyurethane panels, insulated, two sides covered with plastic-coated iron sheets, refrigerating chambers are of a height of up to 10 m and capacity of up to 20,000 m3
18
Scale ice-makers
8418
69
50
...
...
...
19
Sterilizing steamers
8419
20
00
Of types of 20, 52 and 75 liters
20
Cabinet dryers
8419
...
...
...
19
Of types of between 30 and 200 liters
21
Drum dryers
8419
Of an output of up to 1 ton/hr
22
...
...
...
8419
39
19
Of a capacity of 2 liters/h, an input wind temperature of 180-350o C, an output wind temperature of 40-80o C, an output of 12 kW, and with variable injection speeds
23
Block brick-pressers
8420
10
90
...
...
...
24
Sleeve-type dust filters
8421
39
Of various kinds
25
Sluice-gate -closing and -opening machines, operated by electric motor
8425
...
...
...
00
Of a lifting capacity of up to 100 tons
26
Sluice-gate -opening and-closing machines, hand-operated
8425
19
00
Of a lifting capacity of up to 30 tons
27
...
...
...
8425
31
00
Of a lifting capacity of up to 50 tons
28
Assorted winches
8425
39
00
...
...
...
29
Hydraulic jacks for tunnel furnaces
8425
42
Of a thrust of up to 60 tons, a stroke of 1.6 m
30
Derricks on assorted river ships, coastal ships
8426
...
...
...
00
Of a lifting capacity of up to 15 tons, a reach of 18 m
31
Gantry cranes
8426
Of a lifting capacity of up to 125 tons, a span of up to 64 m
32
...
...
...
8426
Of one-beam type (of a lifting capacity of up to 10 tons, a span of up to 25 m)
Of two-beam type (of a lifting capacity of up to 90 tons, a span of up to 34 m)
Of tower type (of a lifting capacity of up to 20 tons, a reach of up to 25 m)
33
Elevators
8428
...
...
...
Of a lifting capacity of up to 500 kg – an output of 3 kW
34
Conveyor screws of all kinds
8428
Of a diameter of up to 600 mm and a length of 30 m
35
...
...
...
8428
10
10
For carrying humans (of a load of up to 2 tons and a speed of up to 1.5m/s)
For carrying goods (of a load of up to 5 tons and a speed of up 1.5 m/s)
36
Skip hoists
8428
10
...
...
...
Of a capacity of up to 60 m3/h
37
Conveyor buckets of all kinds
8428
32
Of a capacity of up to 60 m3/h, a height of 25 m
38
Waggons of tunnel furnaces
...
...
...
50
00
39
Static pneumatic-tire road rollers
8429
40
10
10 - 12 tons
...
...
...
Static steel-wheel road rollers
8429
40
10
6 - 12 tons
41
Vibrating steel-wheel road rollers
8429
40
...
...
...
Of a load of up to 10 tons when vibrating
42
Equipment for driving cast-in-place concrete piles for construction works, including:
Drilling buckets
...
...
...
41
00
f: 600 - 2,200 mm
Scrapping buckets
8431
41
00
f: 600 - 2,200 mm
...
...
...
Concrete-placing tube sets
8431
43
90
f: 219 - 273 mm, 80 m long
Cleaning blow-tubes
8431
43
...
...
...
f: 89 mm, 80 m long
43
Sugarcane-planting combined machines
8432
Making cuts and fertilizing before planting at a capacity of 0.2 ha/h, with more than 40,000 cuttings and a working width 1.4 m
44
Spreading rice harvesters
...
...
...
51
00
Of a cutting width of 1.2 - 1.5m an output of up to 0.5 ha/h
45
Rice-threaders, with or without motor
8433
52
00
Of an output of up to 2.5 tons/h
...
...
...
Combined sugarcane harvesters
8433
59
00
Of a capacity of 0.3-0.5 ha/h, automatically cutting tops, roots and conveying back in rows
47
Milking machines
8434
10
...
...
...
Operated by single-phase motor of a power of 1.1 kW, a speed of 4,450 rounds/minute, double-pace type, and up to the food quality, hygiene and safety standard
48
Ostrich egg incubators
8436
21
AT-252, of a capacity of 252 eggs/batch
49
Fish feed pelleting machines
...
...
...
80
Of a capacity of 1,500 kg/h, an output of 75 kW, a weight of 2,600 kg, and dimensions of 3,000 x 2,500 x 3,000 mm
50
Rice-husking machines
8437
8437
80
80
...
...
...
20
Of a capacity of up to 6 tons/h
51
Rice-polishing machines of all kinds
8437
80
51
Of a capacity of up to 6 tons/h
52
...
...
...
8437
10
Of a capacity of up to 10 tons/h
53
Beer production chains
8438
40
...
...
...
54
Fish powder processing chains
8438
80
91
Of a capacity of up to 80 tons of raw materials/day
55
Pie filling extruders
8438
...
...
...
91
Of a capacity of 2,400 products/h, with a filling weight of 8-20 g (an error of 0.5 g)
56
Krap paper production chains
8439
20
00
Of a capacity of up to 1,000 - 10,000 tons/year
57
...
...
...
8439
20
00
Of a capacity of up to 2,000 tons/year
58
Tissue paper production chains
8439
20
00
...
...
...
59
Stamp-removing and postage-printing machines
8443
59
60
Automatic thread cutters in industrial sewing machines
8445
...
...
...
19
Seam programming and automatic control of seaming needles
61
PP bag weaving machines
8447
MDB-4, of a capacity of 1.7-2 m/minute
62
...
...
...
8448
59
00
AC-680, of a speed of 10-40 m/minute
63
Toothed rough rolling machines
8455
10
...
...
...
64
Plain rolling machines
8455
10
Up to d = 1,000 mm, l = 800, 20 m3/h
65
Construction steel rolling chains
8455
...
...
...
00
Of a capacity of up to 30,000 tons/year
66
Corrugated iron sheet rolling chains
8455
22
00
Of a capacity of 15-20 HP, a weight of 8-12 tons, dimensions of 10 x 1.5 m, a rolling speed of 3-5 m/minute, and an iron sheet thickness of 0.34-0.6 mm
67
...
...
...
8455
22
00
Of a capacity of 30 HP, a weight of 8.5 tons, dimensions of 8 x 8 m, a rolling speed of 12-15 m/minute, and an iron sheet thickness of 1.5-3 mm
68
Common-type multi-purpose lathes
8458
19
...
...
...
69
Rod drilling machines
8459
29
Drill’s diameter of up to 40 mm, a stroke of 400 mm
70
Table drilling machines
8459
...
...
...
Of a diameter of up to 13 mm
71
Two-stone grinding machines
8460
90
Of a diameter of up to 400 mm
72
...
...
...
8461
20
Of a stroke of 650 mm
73
Rod sawing machines
8461
50
...
...
...
74
Pneumatic hammers
8462
10
Weighing up to 75 kg
75
Sand separators
8474
...
...
...
Of a capacity of 25 – 50 m3/h
76
Spiral screws
8474
10
10
77
...
...
...
8474
20
Of a capacity of up to 50 tons/h
78
Ball mills
8474
20
...
...
...
Up to 14 tons/h, n = 21.4 rounds/minute
(Input materials: 0-0.25 mm, output products: 0-0.074 mm)
79
Super-fine ball mills
8474
20
For crushing calcium carbonate, of a capacity of up to 2.5 tons/h, a fineness of d50 to 2 μm, d97 to 10 μm
80
...
...
...
8474
20
Up to 10 m3/h
81
Circle mills
8474
20
...
...
...
82
Concrete-mixing machines of free-drop type
8474
31
Up to 250 liters/batch, 5.2 kW
83
Concrete-mixing machines of coercive type
8474
...
...
...
Up to 500 liters/batch, 10 kW
84
Concrete-mixing stations
8474
31
Of a capacity of up to 80 m3/h
85
...
...
...
8474
32
Of a capacity of up to 104 tons/h
86
Combined vacuum mixing-extruding machines
8474
39
10
...
...
...
87
Two-axe mixers with screen filters
8474
39
10
Of a capacity of up to 20 m3/h, 40 kW
88
Equipment for manufacturing centrifugal water pipes and reinforced concrete poles
8474
...
...
...
10
Up to 300 - 1,500 mm; 75 kW; 110 -220 kV
89
PEHD pipe production chains
8477
20
20
Producing PEHD, LD, PVC, PTE pipes, of a diameter of f400, f630
90
...
...
...
8477
40
10
Of C-class width, a length of up to 14 m, 15 belts per batch, molding temperature of 150o C, hydraulic diameter of 360 mm, mold size of 20 x 36 inches, pressure of 150 kg/cm2, semi-automatic type
91
Equipment for feeding and –heat-drying materials for plastic presses
8477
90
39
...
...
...
92
Rubber latex processing chains
8479
Of a capacity of up to 6 tons/h
93
NPK fertilizer production chains
8479
...
...
...
Of a capacity of 30,000 tons/year
94
Micro-biological fertilizer chains
8479
Of a capacity of 20 tons/h
95
...
...
...
8479
81
Of a coiling speed of up to 2,000 rounds/minute, motor power of 2 x 0.5 HP, three phases, 220/380V, number of coiling grooves 12-30, micro-control type
96
Rotary grates of cement shaft furnaces
8479
82
19
...
...
...
97
Hydraulic gear box assemblies
8483
40
21
Fitted with diesel motor of up to 15 CV
98
Generators (ashore)
8501
...
...
...
Of an output not exceeding 75 kVA
8502
11
00
Of an output voltage of 220/240 V
99
...
...
...
8501
Of an output of up to 2.2 kW, asynchronous capacitor motor, short-circuit rotor
100
Three-phase AC motors (not watertight)
8501
...
...
...
101
Three-phase AC motors (not watertight)
8501
Of an output of between 90 kW and 1,000 kW, asynchronous motor, short-circuit rotor of 600 rounds/minute
102
DC-46V source system
8504
...
...
...
30
VITECO-ARGUS (10A - 600A)
103
Source system
8504
40
90
HRS 4500
SDPS 250
...
...
...
Independent source equipment
8504
40
90
DPS 4825
DPS 4850
105
DC source equipment
8504
...
...
...
90
HFCR-1600
106
Ballasts for fluorescent tubes
8504
10
00
220V - 50 Hz
Of an output of between 20 and 40 W
...
...
...
Voltage transformers
8504
8504
8504
21
22
23
Of a voltage of up to 110 kV
...
...
...
108
Electric current transformers
8504
31
10
Of a voltage of between 6 and 35 kV,
a current transformation ratio 5 – 1,000/5A
109
One-phase voltage transformers (ashore)
...
...
...
31
10
Of a voltage of between 6 and 35 kV, induction type
110
Three-phase voltage transformers (ashore)
8504
31
10
Of a voltage of between 6 and 15 kV, induction type
...
...
...
Low-voltage 380V and medium-voltage 35kV instrument transformers
8504
31
Primary, up to 2,000 A; secondary, 1A and 5A
112
Medium-voltage instrument transformers
8504
32
...
...
...
Of a voltage of up to 35 kV
113
Gear boxes
8708
40
HS14, HS19, GT10, GT2, HDC
114
Miner’s torches
...
...
...
8513
10
10
10
20
DM 10 A
115
Miner’s torch-charging stands
8513
...
...
...
90
90
10
20
GN 16 - 32 – 48
116
Subscriber cards of electronic switchboards
8517
...
...
...
For postal sector
117
Public telephones
8517
19
10
V-820 type
118
VSAT switchboards
...
...
...
30
DTS VSAT
119
Wire connection boxes
8517
30
HC, HD, HDTM-50, HPDR, jack batche
...
...
...
Connection boxes
8517
30
HCN 30, HCN 50
121
Subscriber security boxes
8517
30
...
...
...
DS391, General Department of Taxation (GDT)
122
Subscriber line connection boxes
8517
30
UD
123
Telephonic cable connection cabinets
...
...
...
30
Of iron and composite (KP 300, TS, KP 300 PCS, KP-600-PCS, KP-1600, KP-600, KP-1200)
124
Subscriber security boxes
8517
30
DS301
...
...
...
125
Cable sleeves
8517
30
PMS 1-3
PMS 4-6
126
Optic fiber cable sleeves
...
...
...
30
PMO-12/72 FO
127
Post office boxes
8517
30
...
...
...
Manual direction finder (MDF) connection devices
8517
50
From 500 to 5,000 pairs
129
Data-link control (DLC) subscriber circuit devices
8517
50
...
...
...
130
Optic-fiber cable terminal equipment
8517
50
STM-1, STM-4, STM-16
131
Modems V-ADSL
...
...
...
50
10
For common telephones
132
DTS-4000-AN access switchboard system
8517
50
90
...
...
...
Devices to prevent illegal line connection
8517
50
90
P-line type
134
Lightning-cutting, screening devices
8517
80
...
...
...
LPS
135
MDF five-point security devices
8517
90
90
MDF S2000-PTC
136
MDF-connecting stands of P6000 type
...
...
...
90
90
MDF P6000
137
GANIVO covers of communication cable holes
8517
90
90
Nhp003023023
...
...
...
Wire connection slates
8517
90
90
One pair with grease (BI-1), 10 pairs with grease (BI-10), line SL10, line PO-10 (IDC102), subscriber line (PO-IDF and PO-ID)
139
REF cable connectors
8517
90
...
...
...
UY2
UY-POSTEF
140
Optic transmission PDH Optimux (4E1)
8517
90
90
141
...
...
...
8517
80
99
POSTEF PP-RJ45/16
142
Lightning-arresting devices on lines
8517
80
99
...
...
...
143
Data-link control devices
8517
90
90
POSTEF DK-2000
144
Assorted speakers
8518
...
...
...
145
Magnetized cards
8524
60
00
Entry/exit control cards
146
...
...
...
8525
10
10
FM band, of an output of 1-50 kW, cooled with air or liquids
147
Transmission equipment for television broadcasting
8525
10
10
...
...
...
148
Video connection control units
8525
10
21
Wire and wireless type
149
Central control systems
8525
...
...
...
22
150
Remote control systems
8525
10
23
151
...
...
...
8525
10
40
152
Digital microwave equipment
8525
20
50
...
...
...
153
Few-channel digital microwave equipment
8525
20
50
Between 1 and 6 channels
154
Digital radio relay systems
8525
...
...
...
50
155
Transmitters for radio telephony and telegraphy
8525
20
91
VHF/UHF 1GHz-14GHz
156
...
...
...
8525
20
92
VHF/UHF 1GHz-14GHz, analog/digital technology
157
Microwave transmitters for radio broadcasting
8525
20
99
...
...
...
158
Wireless radio transmission equipment
8525
20
99
Remote-control wireless radio receivers, remote-control multi-channel encoders
159
Ground radars
8526
...
...
...
10
160
Radio remote control units
8526
92
00
161
...
...
...
8529
Of a height of up to 150 m
162
Antenna pillars
8529
...
...
...
163
Assorted antennas for transmitters
8529
10
For radio and television broadcasting, radio telephony and telegraphy
164
Spare parts and accessories of transmitters
8529
...
...
...
For radio and television broadcasting: dividers, adders, filters, channel adders
165
High-voltage switches (ashore)
8535
21
For a voltage of 6 - 35 kV. Standard current of between 200 and 1,000 A
166
...
...
...
8535
40
10
167
Assorted automatic circuit breakers (ashore)
8536
20
00
...
...
...
I of up to 600 A
168
Switches and current-converting switches (ashore)
8536
50
I of up to 3,000 A
169
Magnetic starters (ashore)
...
...
...
90
90
Ucd 220 V, 380 V
I of between 4 A and 450 A
170
Electric cabinets (ashore)
8537
...
...
...
171
Grid control and security cabinets, and transformers
8537
At transformer stations for a voltage of up to 220 kV
172
Waterway navigation signal lights BH-998P
8539
...
...
...
90
173
SIM cards
8542
10
00
16 K, 32 K, 64 K for GSM mobile phones
174
...
...
...
8542
10
00
16 K, 32 K, 64 K for CDMA mobile phones
175
Public phone cards
8542
10
00
...
...
...
176
Subscriber telephone lines with reinforced wires
8544
43
12
POSTEF DROPWIRE 11 x 0.2
177
Electrically insulated porcelain
8546
...
...
...
Of ceramics, for a voltage of up to 35 kV
178
Railway passenger coaches
8605
00
00
Various kinds (hard seats, soft seats; hard berths, soft berths; double-deck coaches; B coaches), high-class coaches, of the second generation and a length of 20 meters
179
...
...
...
8605
00
00
180
Composite tank wagons for the transport of fluids
8606
10
00
...
...
...
181
H coaches
8606
10
00
Of a length of 14 m, fitted with bogies 34B made in China
182
Over-size H coaches 1435
8606
...
...
...
00
Of a length of 14 m and a load of 60 tons
183
Covered cargo coaches
8606
91
00
Of a length of 14 m, fitted with modified bogies 34 B
184
...
...
...
8606
99
00
Of a length of 14 m, fitted with bogies 34 B made in China
185
3-GCH M container coaches
8606
99
00
...
...
...
186
N (low-wall) coaches
8606
99
00
Of a length of 14 m, fitted with modified bogies 34 B
187
Passenger coach bogies of all kinds
8607
...
...
...
00
Indian-type with steel springs, air-spring type
188
Cargo coach bogies of all kinds
8607
12
00
Of welded steel type
189
...
...
...
8701
Of between 8 CV and 20 CV
190
Passenger cars
8702
10
...
...
...
191
Buses
8702
10
10
Of common type, with up to 80 seats
192
Small cars
8703
...
...
...
Of up to 9 seats
193
Dumpers
8704
10
Of a tonnage of up to 15 tons
194
...
...
...
8704
8704
21
31
Of a gross tonnage of up to 5 tons
195
Crane trucks and lift trucks
8705
...
...
...
00
Capable of lifting up to 14 m
196
Folklifts
8705
10
00
Of a load of up to 2 tons
197
...
...
...
8705
90
10
Of a capacity of 3-8 m3 of water
198
Refuse collection trucks
8705
90
10
...
...
...
199
Mobile television stations
8705
90
90
200
Mobile stages
8705
...
...
...
90
Of an area of 80 m2
201
Double-deck motorbike carriers
8705
90
90
Of a load of up to 40 motorbikes
202
...
...
...
8705
90
90
Of a capacity of up to 12 m3
203
Motorcycles
8711
10
...
...
...
8711
20
Of a cylinder capacity of between 50 and 250 cc
204
Bicycles and other pedal-powered cycles (including three-wheel cargo pedicabs), non-motorized
8712
...
...
...
8712
00
20
...
...
...
8712
00
30
8712
00
90
...
...
...
205
Passenger ships
8901
10
Of common type, with up to 300 seats
206
Self-propelled ferryboats
8901
...
...
...
All types
207
Oil tankers
8901
20
Of a tonnage of up to 20,000 tons
208
...
...
...
8901
20
Of a tonnage of up to 5,000 tons
209
Cargo ships
8901
90
...
...
...
210
River-coastal self-propelled ships
8901
90
Of a tonnage of between 200-1,100 tons
211
Special-purpose barges fitted with assorted cranes
8901
...
...
...
Of a lifting capacity of up to 4,200 tons
212
Sea barges
8901
90
10
All types
213
...
...
...
8901
90
10
All types
214
River tug barges
8901
90
10
...
...
...
215
Special-use barges for oil and gas industry
8901
90
26
Of a length of 109.8 m, a width of 32 m, a height of 7 m and a tonnage of 12,000 tons
216
Container sea liners
8901
...
...
...
Of a tonnage of up to 2,000 TEU
217
Assorted fishing vessels of wood shells
8902
Of an output of up to 600 CV
218
...
...
...
8902
Of an output of up to 1,980 CV
219
Assorted fishing vessels of composite shells
8902
...
...
...
220
Fishing service vessels
8902
Of an output of up to 2,000 CV
221
Fishery control vessels
8902
...
...
...
Of an output of up to 600 CV
222
Sea tug vessels
8904
Of an output of up to 7,000 CV
223
...
...
...
8904
Of an output of up to 3,000 CV
224
River tug-push vessels
8904
...
...
...
225
Self-propelled dredgers
8905
10
00
Of a capacity of up to 5,000 m3/h
226
Non-self-propelled dredgers
8905
...
...
...
00
Of a capacity of up to 5,000 m3/h, an output of up to 4,170 CV
227
River and sea dredgers
8905
10
00
With a dredging depth of 10-20 m, an output of up to 3,000 CV
228
...
...
...
8905
90
10
Of a lifting capacity of up to 20,000 tons
229
Special-purpose high-speed ships
8906
90
90
...
...
...
230
Marine research ships
8906
90
90
Of an output of up to 5,000 CV
231
Buoy-laying machines of all kinds
9807
...
...
...
Of a lifting capacity of up to 5 tons
232
Electronic scales
9016
00
10
C-3000, C30K, C-6000, C-150KP, C-60KP, used for postal service
233
...
...
...
9016
00
10
For up to 120 tons
234
Galvanopuncturing machines
9018
90
90
...
...
...
235
Combined electric meters and registers
9028
For metering electric motors of an output of under 50W, voltage and power
236
One-phase and three-phase electric meters
9028
...
...
...
10
U of up to 380 V
I of up to 100 A
237
Card-accepting gate entry and exit control devices
9106
10
00
...
...
...
LIST
OF CONSTRUCTION
SUPPLIES WHICH CAN BE PRODUCED AT HOME
(Promulgated together with Decision No. 827/2006/QD-BKH of August 15, 2006
of the Planning and Investment Minister)
Ordinal number
Names of supplies
Codes according to the Import Tariff
Specification signs, description of technical characteristics
Heading
Sub-heading
1
...
...
...
2505
Black sand, yellow sand
2
Quartz
2506
10
00
...
...
...
3
Clay
2507
00
00
4
Kaolin
2507
...
...
...
00
Al2O3: 21 – 37%
5
Bentonite for cast-in-place piles
2508
10
00
HPB600-API, in light yellow powder, of high viscosity, for use as a drilling mud for cast-in-place piles, petroleum exploration and exploitation
6
...
...
...
2508
10
00
In light yellow powder
7
Bentonite for drilling wells
2508
10
00
...
...
...
8
Diatomite
2512
00
00
In powder form
9
Marble blocks, slabs and slates
2515
...
...
...
00
00
10
Granite, basalt, base and sabbase blocks, slabs and slates.
2516
6810
...
...
...
00
00
11
Construction stone and gravel
2517
...
...
...
12
Dolomite
2518
In gray or white powder
13
Limestone and limestone powder
2521
...
...
...
00
14
Lime
2522
15
...
...
...
2523
10
00
For production of Portland cement
16
Sulfate-resisting cement
2523
30
00
...
...
...
17
Pozzolanic cement
2523
90
00
PCpuz
18
Low-heat cement
2523
...
...
...
00
PCit
19
Portland cement
2523
29
PCB30, PCB40, PC30, PC40, PC50
20
...
...
...
2523
21
00
PCw
21
Mica
2525
20
00
...
...
...
22
Feldspar
2529
10
00
In white or light-yellow powder or granules
23
Fluoride
2529
...
...
...
21
22
00
00
In powder
24
Bottled oxygen
2804
40
...
...
...
Purity > 99.6%
25
Bottled nitrogen
2804
30
00
Purity > 99.95%
26
Dioxide carbon (liquid, solid)
...
...
...
21
00
Purity > 99.6%
27
Calcium chloride (CaCl2)
2827
20
10
In white powder
...
...
...
Edible salt
2827
39
00
Refined and industrial salt (NaCl)
29
Carbonate calcium (CaCO3)
2836
50
...
...
...
In white powder or granules
30
Flour silicate
2839
90
00
In light yellow powder
31
Barite API
...
...
...
00
90
In light beige powder
32
Biosafe
2851
00
90
In paste liquid form, colored from light yellow to yellow
...
...
...
Acetylene (C2H2)
2901
29
10
Purity > 99.7%
34
DMC - lub
2904
00
...
...
...
In mud form and dark color
35
Paints for drilling platforms and other structures
3208
3209
10
90
40
90
...
...
...
36
Chemical paints of all kinds
3208
3209
Assorted paints for specific industrial decoration
37
Solvents accompanying paints
...
...
...
90
90
In light yellow powder
38
Industrial adhesives
3506
...
...
...
Refractory mortar
3816
00
10
Alum paste and chamotte
40
HDPE plastic tubes for protection of communication cables
3917
...
...
...
f32 mm- f40 mm
41
Multi-layer aluminum plastic tubes
3917
Inner diameter of up to f 35 mm
42
PVC tubes and accessories
...
...
...
f20 - f200 mm
43
Plastic roofing sheets and boards
3920
3921
...
...
...
44
Panels of Polyurethane
3921
13
10
50-150 mm thick
45
Plastic doors
3925
...
...
...
20
30
00
00
46
Civil-use water supply and drainage washers
4016
99
...
...
...
To be fitted to cast iron, plastic, and concrete pipelines
47
Rubber sheets
4016
99
94
48
Electrically insulated carpets
...
...
...
99
99
For a voltage of 10-22-35 kV, of a size of 1 m x 0.64 m x 0.008 m
49
Electrically insulated boots and gloves
4016
99
99
For a voltage of 10-22-35 kV
...
...
...
Rubber carpets for physical training and sports
4016
99
94
Size of 1 x 0.008 m for badminton courts
51
Bamboo boards
4602
10
...
...
...
For use as construction cofferings
52
Wood for chocking or lining on drilling platforms
4017
99
53
Coffering wood of standard sizes
...
...
...
20
54
Assorted setts
6801
00
00
...
...
...
Millstones, grinding wheels or the like
6804
10
00
Made of artificial corundum granules, ceramic adhesive.
Of an outer diameter of between 5 mm and 900 mm, a thickness of between 5 mm and 300 mm
56
Grinding wheels of agglomerated abrasives containing grindstone granules of over 99% of Al203
6804
...
...
...
Made of artificial corundum granules.
Available in square, rectangular and other unusual shapes
57
Edge grindstones, metal-cutting stones, containing grindstone granules of over 99% of Al203
6804
30
Made of artificial corundum granules, plastic adhesive.
...
...
...
58
Artificial abrasive powder (granule)
6805
Rough and fine granules, made from aluminum bauxite ore
59
Products of cement and concrete
6810
...
...
...
60
Electric wire poles of centrifugal concrete
6810
91
90
For grids of up to 35 kV
61
...
...
...
6810
11
00
Created by compressing cement and sand
62
Products of asbestos cement, cellulose fiber cement or the like
6811
...
...
...
63
Roofing sheets of fibro-cement and asbestos cement
6811
6811
10
20
00
00
920 x 1,500 mm
...
...
...
Refractory bricks
6902
10
00
Mg-Chrome, Mg-Spinel (MS80-, MS86), Chamotte A (TS A), Chamotte B (TS B)
65
Walling and flooring tiles
6904
6907
...
...
...
(Ceramic, Granite, Cotto, Terrazo, Brestonstone, Terastone), of a size of up to 500 mm x 500 mm
66
Building bricks, flooring tiles, roofing tiles
6904
...
...
...
Ceramic sanitary ware
6910
All kinds
68
Flat glass, opacified, reflecting glass
7003
7003
...
...
...
7003
7004
7004
7004
7004
7005
7005
7005
7005
...
...
...
12
19
19
20
20
90
90
10
10
...
...
...
21
20
90
20
90
20
90
20
90
...
...
...
90
20
90
Of a thickness of between 1.5 - 18 mm
69
Multiple-walled glass
7008
00
00
...
...
...
70
Mirror
7009
Of a thickness of between 1.5 - 18 mm
71
Hot-rolled band and coiled steel, already soaked for rust removal
7208
7208
7208
7208
7208
...
...
...
SPHC/O, of a width of 600 mm or more
In coils of a thickness of 3-4 mm
In coils of a thickness of 1.5-3 mm
In sheets of a thickness of 3-4 mm
In sheets of a thickness of 1.5-3 mm
72
Cold-rolled band and coiled steel
7209
7209
7209
7209
7209
7209
7209
16
17
18
26
27
28
SPCC, SPCC-1, SPCC-2,4,8, SPCD, SPCE, of a
width of 600 mm or more
In coils, a thickness of 1-1.8 mm
In coils, a thickness of 0.5-1 mm
In coils, a thickness of 0.15-0.5 mm
In sheets, a thickness of 1-1.8 mm
In sheets, a thickness of 0.5-1 mm
In sheets, a thickness of 0.15-0.5 mm
73
...
...
...
7210
30
11
Of a thickness not exceeding 1.2 mm
74
Alluminum-zinc alloy-plated steel sheets
7210
61
10
...
...
...
75
Zinc-plated and colored steel sheets
7210
70
30
Of a thickness not exceeding 1.2 mm
76
Alluminum-zinc alloy-plated and colored steel sheets
7210
...
...
...
90
Of a thickness not exceeding 1.2 mm
77
Steel rods, steel coils of all kinds (round plain and veined)
7213
7214
7214
7214
10
...
...
...
20
91
00
f5.5 - f40 mm
78
Steel in shapes
7216
...
...
...
7216
7216
7216
7216
7216
10
21
22
31
...
...
...
33
40
00
00
00
11
11
11
11
...
...
...
79
Common steel wire (black and zinc-plated)
7217
7217
7217
10
20
90
10
...
...
...
20
f1 - f5 mm
80
Cast iron pipes (gray cast iron, ductile cast iron)
7303
7303
7303
7303
7303
...
...
...
00
00
00
00
11
12
13
21
22
...
...
...
81
High pressure pipes, valve doors
7304
31
Of steel for hydropower projects, of a thickness of between 6 and 20 mm, pressure of over 15 at
82
Assorted black or zinc-plated welded steel pipes
7306
...
...
...
f 14 - f 115 mm
83
Assorted large-size twisted welded steel tubes
7306
f 400 - f 2,600 mm
84
...
...
...
7308
30
00
Of common types
85
Steel girdles of road bridges and railroad bridges
7308
10
...
...
...
Steel girdles of railway bridges, of a span of up to 100 m, and a tonnage of T26,
86
House frames, warehouse frames, pre-fabricated house structures of steel
7308
9406
90
00
10
94
...
...
...
87
Roofing sheets- corrugated zinc-plated or colored steel sheets
7308
90
30
Of a thickness of 0.25-0.55 mm, and a length of 3,500 mm
88
Assorted tanks
7309
...
...
...
00
Of common types
89
Assorted casks
7310
Of common types
90
...
...
...
7312
Structured of up to 37 fibers, a cross section of up to 170 mm2
91
Zinc-plated wire, barbed wire
7313
00
00
...
...
...
92
Steel or iron grill, netting, fencing
7314
7314
20
50
00
00
Of common types
...
...
...
Iron and steel nails
7317
94
Screws, bolts, nuts, washers
7318
...
...
...
Of common types
95
Round copper wire
7408
11
10
With a cross section of between 16 and 630 mm2
96
Uncoated copper cable
...
...
...
7413
00
00
11
12
97
Assorted electric wires
7605
...
...
...
Non-alloy aluminum core
Non-alloy copper core
98
Shaped aluminum structures
7610
7610
10
90
...
...
...
90
99
Uncoated aluminum cable
7614
7614
7614
7614
90
...
...
...
90
90
11
12
13
19
With a cross-section of between 16 and 1,200 mm2
100
Steel-core uncoated aluminum cable
...
...
...
7614
7614
7614
10
10
10
10
11
12
...
...
...
19
With a cross-section of between 35 and 1,200 mm2
101
Safety signboards
8310
00
90
Of a mixture of composite plastic and glass fibers
102
...
...
...
8311
20
NAEH14, of a cross section of f2.4; f3.2; f 4.0
NA71T1, of a cross section of f1.0; f1.2; f 1.6
NA70S, of a cross section of f0.8 - f 1.6
103
Welding rods
8311
...
...
...
NT6013, NB6013, NA6013, NA7016, NA7018, of a size of f 2.5; f3.25; f 4.0; f5.0 - f 5.4
104
Multi-purpose joints
8483
60
00
HH50
105
...
...
...
8485
90
90
f24 - f32 of composite
106
Iron and composite boxes of electricity meters
8485
90
90
...
...
...
107
Conductor coupling stands
8517
50
90
ODF conductor, IDF conductor
108
Conductor dividers
8517
...
...
...
90
6-way iron boxes, 6-way and 9-way composite boxes
109
Telephone cables
8544
49
Of a diameter of between 0.4 and 0.9 mm, between 6 and 1,200 pairs
110
...
...
...
8544
8544
8544
8544
11
11
20
20
20
...
...
...
10
20
With 1 or two cores, with a cross section of up to 630 mm2 each core
With 3 or 4 cores, with a cross section of up to 400 mm2 each core
111
Data transmission cables (LAN cables)
8544
49
...
...
...
112
Telephone subscriber wire
8544
49
Single or multiple filaments
113
Low-, medium- and high-voltage cables, electrically insulated with plastics and EPR
8544
8544
8544
...
...
...
Of a (core) cross section of up to 2,000 mm2 for one-phase lines and a voltage of 0.6 kV – 170 kV
114
Control cables of all kinds, consisting of between 2 and 91 cores
8544
Of a cross section of between 0.5 and 16 mm2
115
...
...
...
9001
10
Used for the postal service
116
Assorted lamp bulbs and tubes
8539
8539
8539
8539
21
22
31
39
...
...
...
OF
SUPPLIES NECESSARY FOR PETROLEUM ACTIVITIES, WHICH CAN BE PRODUCED AT HOME
(Promulgated together with Decision No. 827/2006/QD-BKH of August 15, 2006
of the Planning and Investment Minister)
Ordinal number
Names
of goods items
Codes under the Import Tariff
Specification signs, description of technical characteristics
...
...
...
Sub-heading
1
Rice husk
1213
00
00
2
...
...
...
1515
19
00
In liquid form
3
Edible salt (sodium chloride)
2501
00
10
...
...
...
4
Graphite powder
2504
10
00
5
Quartz
2506
...
...
...
00
In white powder
6
Bentonite for cast-in-place piles
2508
10
00
HPB600-API, in light yellow powder, of high viscosity, for use as a drilling mud for cast-in-place piles, petroleum exploration and exploitation
7
...
...
...
2508
10
00
In light yellow powder
8
Bentonite for drilling wells
2508
10
00
...
...
...
9
Soundproof- or heat- resistant materials of bazalt
2508
40
00
In sheets
10
Marble powder
2517
...
...
...
00
11
Dolomite
2518
In gray and white powder
12
...
...
...
2523
29
10
For construction of marine projects
13
Thermal cement for drilling wells
2523
90
00
...
...
...
14
Class-G cement
2523
90
00
15
Mica
2525
...
...
...
00
In white, transparent flakes, of a size of between 16 and 100 mesh
16
Felspar
2529
10
00
In white or light-yellow powder or granules
17
...
...
...
2710
19
ISO (150EP, 32TL, 37TL, 46TL, 68TL, 100TL)
18
Lubricating oils
2710
99
25
...
...
...
19
Lubricating grease
2710
19
26
Lithium grease (L2, L3, L4), Cana 1-13, MC 70
20
Hydraulic oils
2710
...
...
...
27
VIT32, VIT45, VIT68, VIT100, VIT220
21
Chlohydric acid
2806
10
00
22
...
...
...
2827
20
10
In white powder
23
Bi-potassium alum
2833
30
...
...
...
24
Limestone (CaCO3)
2836
50
In white powder or granules
25
Flour silicate
2839
...
...
...
00
In light yellow powder
26
Barite API
2851
00
90
In light beige powder
27
...
...
...
2942
00
00
In viscous form, dark-colored
28
Paints for drilling platforms and steel structures
3208
3209
10
...
...
...
40
90
29
Assorted chemical paints
3209
Assorted paints for specific industrial decoration
...
...
...
Solvent, accompanying paints
3209
90
90
In light yellow powder
31
U-F DAK adhesive
3506
...
...
...
32
DOP plasticizers
3812
20
10
33
PVC plastic powder
...
...
...
10
34
Organic siliceous polymer
3910
...
...
...
Wooden boards, for chocking or lining on drilling platforms
4407
99
36
Labor protection devices
6210
6216
10
00
...
...
...
Clothes, shoes, boots, helmets, napkins and gloves
37
Signboards on drilling platforms
8310
00
90
38
Other drilling chemicals
...
...
...
Foaming agents, aluminum stearate, surfactants
OF
RAW MATERIALS, MATERIALS, SUPPLIES AND SEMI-FINISHED PRODUCTS, WHICH CAN BE
PRODUCED AT HOME tc "THE LIST OF RAW MATERIALS, MATERIALS AND
SEMI-FINISHED PRODUCTS THAT CAN BE PRODUCED AT HOME "
(Promulgated together with Decision No. 827/2006/QD-BKH of August 15, 2006
of the Planning and Investment Minister)tc "(Promulgated together with
Decision No.230/2000/QD-BKH of May 4, 2000)"
Ordinal number
Names of goods items
Codes under the Import Tariff
...
...
...
Heading
Subheading
1
Crude soya oil
1507
10
00
2
...
...
...
1507
90
20
3
Crude ground-nut oil
1508
10
20
...
...
...
4
Semi-finished ground-nut oil
1508
90
20
5
Crude coconut oil
1513
...
...
...
00
Crude oil contained in tanks, semi-finished oil on the production chain
6
Semi-finished coconut oil
1513
19
20
7
...
...
...
1515
50
10
8
Semi-finished sesame oil
1515
50
20
...
...
...
9
Cane sugar
1701
11
00
10
Glucose
1702
...
...
...
10
11
Shrimp flavor powder
2103
90
20
12
...
...
...
2103
90
90
13
Tobacco leaves, not stemmed
2401
10
00
...
...
...
14
Tobacco leaves, stemmed
2401
20
00
Heat-dried yellow, sun-dried brown, burley
15
Tobacco stems
2401
...
...
...
10
Big stems, small stems (diameter > 1.5 mm, humidity 9-10%)
16
Kitchen salt
2501
00
10
17
...
...
...
2502
00
00
FeS2 (>= 33% S)
18
Fire clay
2507
00
00
...
...
...
19
Assorted apatite ores
2510
10
Ca5F(PO4)3 with a gross content of P2O5 >= 24% tc "12 Assorted apatite ores 2510.10 Ca5F(PO4)3 with a gross content of P2O5 >= 24% "
20
Granite slates
2516
...
...
...
21
Marble slates
2517
10
90
22
...
...
...
2518
10
00
23
Serpentine ore
2519
90
...
...
...
24
Lime
2522
25
Portland cement clinkers for manufacture of cement
2523
...
...
...
00
PC 30, PC 40, PC 50; Clinker
26
Cement of all kinds
2523
2523
10
29
00
PC 30, PC 40, PC 50
Loose and packed cement (50 kg/pack)
27
...
...
...
2529
CaF2 > 75%
28
Iron ores
2601
00
00
...
...
...
29
Agglomerated iron ores
2601
12
00
30
Manganese ore
2602
...
...
...
00
Mn: 35-40%
31
Manganese dioxide
2602
00
00
MnO2 >= 68%
32
...
...
...
2603
00
00
18-20% Cu
33
Pure lead sulfide ore
2607
00
00
...
...
...
34
Assorted zinc ores
2608
00
00
28-30% Zn
35
Pure chromium ore
2610
...
...
...
00
46% Cr2O3
36
Pure wolframite ore
2611
00
00
65% WO3
37
...
...
...
2614
00
00
TiO2: 52-54%
38
Pure rutile ore
2614
00
90
...
...
...
39
Pure zircon ore
2614
10
00
ZrO2: 62-65%
40
Fat coal
2701
...
...
...
10
41
Coke for metallurgy
2704
00
10
42
...
...
...
2801
10
00
Cl2 >=99.5%
43
Carbon
2803
00
10
...
...
...
44
Bottled nitrogen
2804
30
00
Nitrogen > 99.95%, liquefied nitrogen > 99.95%
45
Bottled oxygen
2804
...
...
...
00
In liquefied gas O2 > 99.6%
46
Yellow phosphorus
2804
70
00
47
...
...
...
2806
10
00
HCl (KT) >= 30%; pure HCl
48
Sulfuric acid
2807
00
10
...
...
...
49
Phosphoric acid
2809
20
00
H3PO4 >= 98%
50
Zinc oxide powder
2817
...
...
...
10
60% Zn, 80-90% ZnO
51
Aluminum hydroxide
2818
30
00
Al(OH)3 (>= 63% Al2O3)
52
...
...
...
2827
39
00
53
Aluminum sulfate
2833
22
00
...
...
...
Al2 (SO4) 3.14 H2O >= 17% Al2O3
54
Alum
2833
30
55
Aluminum ammonium sulfate
...
...
...
30
12
AlNH4 (SO4).12 H2O (>= 10.3% Al2O3)
56
Disodium carbonate
2836
20
00
...
...
...
Magnesium carbonate
2836
99
00
58
Sodium silicates
2839
19
...
...
...
NaSiO3 Module 2.2-3.4
59
Acetylene
2901
29
10
C2H2 > 99.7%
60
Sufactants used for production of cleansing substances (LAS)
...
...
...
90
90
61
Rutile
2938
10
00
...
...
...
Compounds for production of antibiotics
2941
10
Amoxilin, ampicilin
63
Shrimp flavor oil
3302
10
...
...
...
64
Prepared explosives
3602
00
00
Under the Industry Ministry’s Decision No. 03/2006/QD-BCN
65
Detonators, fuzes, detonating cords
...
...
...
Under the Industry Ministry’s Decision No. 03/2006/QD-BCN
66
Compound plasticizers for rubber or plastic
3812
22
00
DOP plasticizer
...
...
...
PVC granules
3904
3904
10
21
39
21
68
PVC tubes and pipes
3917
23
...
...
...
69
PVC membranes
3919
90
30
70
Plastic membranes
...
...
...
43
90
Of a thickness of 0.05 - 0.4 mm
71
PVC wall-covering sheets
3925
90
00
...
...
...
Natural rubber
4001
4001
4001
10
20
29
73
Timber and wood chips, of non-coniferous wood
4401
22
...
...
...
74
Small wood pieces for making matches
4421
90
20
75
Newsprint, in rolls or sheets
...
...
...
00
Of a standard weight of 42-55 g/m2
76
Uncoated paper and paperboard, of a kind used for printing, writing or photocopying, card-making, punch tape paper or waxed base for manufacture of technical paper
4802
Of a standard weight of 40-120g/m2 Excluding those under subheadings of 4802.51.20, 4802.60.20, 4802.30.00, 4802.40.00 and 4802.20.00
...
...
...
Paper shoe insoles
4804
19
00
For lining shoes
78
Cement packing paper
4804
21
...
...
...
Of a standardized weight of 68-75 g/cm2
79
Uncoated and unbleached kraft paper of a low durability (for packing goods and production of small boxes for small articles), and those of a kind already bleached
4804
4804
4804
31
41
51
00
00
00
24 TCN 78-99
80
Uncoated paper and paperboard in rolls or sheets: corrugating medium, common type, double-sided Duplex, Duplex with one side in white and another in gray
...
...
...
81
Toilet paper, table tissue
4818
4818
4818
10
20
30
...
...
...
Five-ply cartons
4819
4819
10
20
00
00
83
200-cigarette cartons with 20 cigarettes in each pack, stiff packs of all kinds
4819
4819
10
20
...
...
...
385*287 mm
84
200-cigarette cartons with 20 cigarettes in each pack, soft packs of all kinds
4819
10
00
366*287 mm and 376*287 mm (Paper or paperboard used as packing)
85
Paper boxes, each for containing a pair of shoes
...
...
...
10
20
00
00
86
Labels of 20-cigarette stiff packs of all kinds
4812
10
233.5*99.5 mm
...
...
...
Base paper, printed, for rolling cigarette filter tips
4823
90
91
Of a standard weight of 28-30 g/cm2
88
Cigarette filter tips
4823
90
...
...
...
89
Sewing thread made of synthetic staple fiber
5508
90
Yarn (except for sewing thread) made of synthetic staple fiber
...
...
...
11
12
00
00
91
Cotton and polyester shoelaces
5609
...
...
...
Tire cord fabrics, made of high-tenacity fiber
5902
93
Plastic-coated fabrics
5903
...
...
...
Leatherette, porous leatherette, canvas, soft fabrics
94
Rubber-coated fabrics
5907
95
Packing of textile PP fiber
Packing of textile PE-coated PP fiber
...
...
...
33
96
Shoe soles of rubber or plastics
6406
20
00
...
...
...
Granite blocs
6802
6802
23
93
00
00
98
Abrasive powder
6805
...
...
...
Of common-use category
99
Ceramic walling and flooring tiles
6810
19
10
Of a maximum size of 400*400 mm
100
Corrugated asbestos cement sheets
...
...
...
10
00
Corrugated asbestos cement roofing sheets
101
Bricks containing by weight over 50% of alumina
6902
20
00
...
...
...
Chamotte bricks
6902
90
00
103
Building bricks, flooring tiles, backing tiles
6904
...
...
...
104
Porcelain sanitary ware
6910
Of common-use category, non-electrically driven
105
Medical glass tubes
...
...
...
f 5 - f 32 mm
106
Flat white and colored sheet glass
7003
Of common-use category, and a thickness of 1.5 - 12 mm
...
...
...
Medicine bottles and pots of glass
7010
2310A-2825CE (from 2 ml to 30 ml)tc "68 Medicine bottles and pots of glass 7010 2301A-2825CE (from 2ml to 30ml)"
108
Empty glass ampules for containing injection fluids
7010
10
...
...
...
From 1 to 10 ml (flat bottom, bell- shaped head, needle-shaped tips, in brown or white color)
109
Filament lamp envelopes (bulbs)
7011
10
00
A 60 (round-shaped lamps of all kinds)
110
Fluorescent lamp envelopes (tubes)
...
...
...
10
f 12 - f 40 mm
111
Glass inners of vacuum flasks or other vacuum vessels
7012
00
...
...
...
Gemstones
7103
Ruby, sapphire
113
Gold
7108
13
...
...
...
99.99% Au
114
Cast iron
7201
20
00
115
Ferro-alloys: Ferro manganese
...
...
...
11
19
00
00
FeMn (65-75%)
116
Fero silicon
7202
7202
21
29
00
00
FeSi (45%)
...
...
...
Steel casts
7206
90
00
118
Steel rods
7213
7213
10
91
...
...
...
f < 100 mm
f < 14 mm
119
Welding rod cores
7213
91
10
120
Steel rods, non-alloy
...
...
...
10
With a carbon content C > 0.6%
121
Steel rods, non-alloy
7214
91
00
Rectangular or square cross-section, C >
0.6%tc "77 Steel rods, non-alloy 7214.91.00 Rectangular or square
cross-section,
C > 0.6%"
...
...
...
Non-alloy steel, in angles, shapes and sections
7216
10
00
in U, I, H shapes, of a height < 80 mm
123
Steel in L shape
7216
7216
21
40
...
...
...
L shape, of a height < 80mm
L shape, of a height of between 80 and 140 mm
124
Steel in U shape
7216
31
00
U shape, of a height of between 80 and 140 mm
125
Steel in I shape
...
...
...
32
00
I shape, of a height of between 80 and 140 mm
126
Steel in H shape
7216
33
00
H shape, of a height of between 80 and 140 mm
...
...
...
Steel in C and V shapes
7216
50
00
C, V shapes, of a height of between 80 and 140 mm
128
Tubes and pipes of cast iron
7303
00
...
...
...
Of common-use category
129
Welded steel tubes and pipes
7305
Of common-use category, between 20 and 114 mm in diameter
130
Steel structures
...
...
...
Of common-use category and house steel frames, road bridge steel beams of a span of up to 100 m and a load of H30; steel railway bridge steel beams of a span of up to 100 m and a load of T26
131
Reservoirs and tanks
7309
00
Of common-use category
...
...
...
Drum-shaped containers
7310
Of common-use category
133
Iron grill, netting and fence
7314
...
...
...
Of common-use category
134
Chains
7315
Of common-use category
135
Common-use bolts + nuts
...
...
...
Of common-use category
136
Grinding steel balls
7325
7326
91
11
10
10
Of common-use category
...
...
...
Cast molds
7325
99
00
138
Copper wire for use as raw materials
7408
7408
11
19
...
...
...
Raw material copper for manufacture of electric cable
f 6 - f 14 mm
f < 6 mm
139
Uncoated copper cables
7413
140
...
...
...
7414
90
Of a cross section of up to 600 mm2
141
Uncoated aluminum cables with steel cores
7914
10
...
...
...
142
Aluminum profiles
7610
Of common-use type
143
Aluminum nettings
7616
...
...
...
00
144
Lead bars
7803
00
10
99.6% Pb
145
...
...
...
7903
90
00
48-50% Zn
146
Tin bars
8003
00
10
...
...
...
147
Handsaws, saw blades of all kinds
8202
Of common-use type
148
Plows, scarifiers and harrows
8432
...
...
...
Of common-use type, trailed by tractors
149
Fluorescent lamp heads
8539
90
61
G13/12*30(26)
150
...
...
...
8544
11
30
All kinds
151
Electric wire of all kinds
8544
...
...
...
OF
RAW MATERIALS, SUPPLIES AND SEMI-FINISHED PRODUCTS IN SERVICE OF SHIPBUILDING
INDUSTRY, WHICH CAN BE PRODUCED AT HOME tc "THE LIST OF RAW MATERIALS,
MATERIALS AND SEMI-FINISHED PRODUCTS THAT CAN BE PRODUCED AT HOME "
(Promulgated together with Decision No. 827/2006/QD-BKH of August 15, 2006
of the Planning and Investment Minister)tc "(Promulgated together with
Decision No.230/2000/QD-BKH of May 4, 2000)"
Ordinal number
Names of goods items
Codes under the Import Tariff
Signs of specifications, description of technical characteristics
...
...
...
Subheading
1
Wall panels
3925
90
00
BM25, BM50 (of fire protection level B-15)
2
...
...
...
3925
90
00
CC25, CC75 (of fire protection levels B-0; B-15)
3
Fire doors
3925
90
00
...
...
...
4
Welding wires
8311
20
NAEH14, sized f 2.4; f 3.2; f 4.0
NA71T1, sized f 1.0; f 1.2; f 1.6
NA70S, sized f 0.8 - f 1.6
NT6013, NB6013, NA6013, NA7016
5
Welding rods
8311
...
...
...
NA7018, sized f 2.5; f 3.25; f 4.0; f 5.0 - f 5.4
6
Ship boilers
8402
11
Of a capacity of between 0.5 and 35 tons of steam/h
;
Quyết định 827/2006/QĐ-BKH về việc ban hành Danh mục thiết bị, máy móc, phụ tùng thay thế, phương tiện vận tải chuyên dùng trong nước đã sản xuất được;Danh mục vật tư xây dựng trong nước đã sản xuất được;Danh mục vật tư cần thiết cho hoạt động dầu khí trong nước đã sản xuất được;Danh mục nguyên vật liệu, vật tư, bán thành phẩm phục vụ cho việc đóng tàu trong nước đã sản xuất được;Danh mục nguyên liệu, vật tư, bán thành phẩm trong nước đã sản xuất được do Bộ trưởng Bộ Kế hoạch và Đầu tư ban hành
| Số hiệu: | 827/2006/QĐ-BKH |
|---|---|
| Loại văn bản: | Quyết định |
| Nơi ban hành: | Bộ Kế hoạch và Đầu tư |
| Người ký: | Trương Văn Đoan |
| Ngày ban hành: | 15/08/2006 |
| Ngày hiệu lực: | Đã biết |
| Tình trạng: | Đã biết |
Văn bản đang xem
Quyết định 827/2006/QĐ-BKH về việc ban hành Danh mục thiết bị, máy móc, phụ tùng thay thế, phương tiện vận tải chuyên dùng trong nước đã sản xuất được;Danh mục vật tư xây dựng trong nước đã sản xuất được;Danh mục vật tư cần thiết cho hoạt động dầu khí trong nước đã sản xuất được;Danh mục nguyên vật liệu, vật tư, bán thành phẩm phục vụ cho việc đóng tàu trong nước đã sản xuất được;Danh mục nguyên liệu, vật tư, bán thành phẩm trong nước đã sản xuất được do Bộ trưởng Bộ Kế hoạch và Đầu tư ban hành
Chưa có Video
