DECISION

STANDARD COST ESTIMATES OF MUNICIPAL SOLID WASTE COLLECTION, TRANSPORTATION AND TREATMENT

THE MINISTER OF CONSTRUCTION

Pursuant to the Government’s Decree No. 62/2013/ND-CP dated June 25, 2013 defining functions, tasks, powers and organizational structure of Ministry of Construction;

Pursuant to the Government’s Decree No. 130/2013/ND-CP dated October 16, 2013 providing for production and provision of public products and services;

Pursuant to the Government’s Decree No. 59/2007/ND-CP dated April 09, 2007 on solid waste management;

At the requests of the Director of the Department of Construction Economics and the Director of the Institute of Construction Economics;

HEREBY DECIDES:

...

...

...

Article 2. This decision comes into force from June 01, 2014.

PP. THE MINISTER
DEPUTY MINISTER




Bui Pham Khanh

Part I

DESCRIPTION OF STANDARD COST ESTIMATES OF MUNICIPAL SOLID WASTE COLLECTION, TRANSPORTATION AND TREATMENT

1. Items of standard cost estimate

- Standard cost estimates of municipal solid waste (MSW) collection, transportation and treatment announced herein include all necessary costs of materials, labour, machinery and equipment for finishing a predetermined volume of MSW collection, transportation and treatment;

...

...

...

2. Grounds for making standard cost estimates

- Technical procedures for MSW collection, transportation and treatment commonly applied in urban areas.

- The Government’s Decree No. 42/2009/ND-CP dated May 07, 2009 on urban area classification.

- Data about the use of labor, vehicles, equipment and technical facilities as well as the application of scientific and technological advances to the MSW collection, transportation and treatment.

3. Structure of standard cost estimates

Standard costs are classified by groups or types of MSW collection, transportation and treatment.  Each standard cost stated includes work contents and conditions for using numerical values, and is expressed in an appropriate unit for performing such work contents.  

Standard cost estimates of MSW collection, transportation and treatment include 06 chapters:

- Chapter I

: Manually sweeping streets and picking up garbage on pavements.

...

...

...

: Collecting and transporting MSW, construction waste and solid healthcare waste by motor vehicles.

- Chapter III

: Treatment of MSW and construction waste.

- Chapter IV

: Treatment of solid healthcare waste.

- Chapter V

: Mechanically sweeping and washing streets.

4. Instructions on application of standard costs

- Standard cost estimates of MSW collection, transportation and treatment are announced by the Ministry of Construction as the basis for relevant organizations and individuals to determine and manage costs of MSW collection, transportation and treatment services.

...

...

...

- In case the MSW collection, transportation and treatment service requires specific technical requirements and conditions other than those of standard costs announced herein or standard costs of certain types of MSW collection, transportation and treatment are not announced herein, Provincial-level Departments of Construction shall take charge and cooperate with relevant provincial-level departments and authorities to adjust standard costs or determine the new ones, and then submit them to Provincial-level People’s Committees for approval and concurrently report the same to the Ministry of Construction.

Part II

STANDARD COST ESTIMATES

Chapter I

MANUALLY SWEEPING STREETS AND PICKING UP GARBAGE ON PAVEMENTS

MT1.01.00. Manually maintaining the cleanliness of streets in daytime

Work contents:

- Prepare working tools and personal protective equipment.

- Give warning and ensure traffic safety during performance of street works.

...

...

...

- Move garbage collection equipment to the prescribed transfer station and then pick up garbage onto truck.

- Clean the transfer station after picking up garbage onto truck.

- Clean and place working tools and equipment at the prescribed place.

Table 1:

Unit:  1km

Code

Type of work

Cost items

Unit

...

...

...

MT1.01.00

Manually maintaining the cleanliness of streets in daytime

Labor:

- 4/7-grade workers

shift

1.20

Notes:

...

...

...

+ Class-I cities:

+ Class-II cities:

+ Cities of class-III ¸ V:

K = 0.95

K = 0.85

K = 0.80

- The standard cost specified in Table 1 is not applied to determination of costs of maintaining the cleanliness of streets with special sanitation requirements (e.g. ancient streets, commercial streets, civilized streets and streets for pilot performance of environmental protection activities).

MT1.02.00. Manually sweeping streets and picking up garbage on streets

Work contents:

...

...

...

- Move garbage containers to the working place.

- Give warning and ensure traffic safety during performance of street works.

- Sweep and pile up garbage and trash on both street and pavement.

- Sweep and remove standing water on street (if any).

- Clean off litter and filth that accumulated on streets.

- Shovel garbage and other waste materials onto containers.

- Move garbage collection equipment to the prescribed transfer station and then pick up garbage onto garbage trucks.

- Clean the transfer station after picking up garbage onto truck.

- Clean and place working tools and equipment at the prescribed place.

...

...

...

Unit:  10,000 m²

Code

Type of work

Cost items

Unit

Standard cost

Street sweeping

Pavement sweeping

MT1.02.00

...

...

...

Labor:

- 4/7-grade workers

Shift

2.5

1.8

...

...

...

02

Notes:

- Working hours: from 18:00 PM to 06:00 AM of the following day.

- The standard cost specified in Table 2 is applied to determination of costs of manually sweeping and picking garbage on pavements (for pavement sweeping) and 02 m of road-bed surface of either side beyond the outside edge of the storm drain (for street sweeping).

- The standard cost specified in Table 2 is the labor cost for manually sweeping and picking up garbage on streets of special-class cities. With regard to cities of remaining classes, the cost is adjusted by the following factor k:

+ Class-I cities:

+ Class-II cities:

+ Cities of class-III ¸ V:

K = 0.95

...

...

...

K = 0.80

MT1.03.00. Manually maintaining median strips

Work contents:

- Prepare working tools and personal protective equipment.

- Move garbage containers to the working place.

- Place warning signs at the working place to ensure traffic safety.

- Sweep  the street surface of a minimum 1.5m width adjacent to the median strip.

- Pile up and shovel garbage onto garbage hand-carts. With regard to moveable median barriers: sweep the road surface where the barrier is located.

- Move garbage collection equipment to the prescribed transfer station and then pick up garbage onto the garbage truck.

...

...

...

- Clean and place working tools and equipment at the prescribed place.

Table 3:

Unit:  1km

Code

Type of work

Cost items

Unit

Standard cost

MT1.03.00

...

...

...

Labor:

- 4/7-grade workers

Shift

0.8

Notes:

- The standard cost specified in Table 3 is applied to determination of costs of maintaining median strips in urban areas where the maintenance of median strips on roads (including fixed and moveable median strips or barriers) is required.

- The standard cost specified in Table 3 is the labor cost for maintaining median trips on roads of special-class cities. With regard to cities of remaining classes, the cost is adjusted by the following factor k:

...

...

...

+ Class-II cities:

+ Cities of class-III ¸ V:

K = 0.95

K = 0.85

K = 0.80

MT1.04.00. Cleaning curbs and collecting garbage around tree bases, utility poles and manholes

Work contents:

- Prepare working tools and personal protective equipment.

- Give warning and ensure traffic safety during performance of street works.

...

...

...

- Clean off rubbish and garbage around tree bases and utility poles (rubbish/ garbage volume is < 0.5 m³) (if any); remove or get rid of grass around the base of tree or utility pole (if any); prune or trim street tree branches (if necessary) and pick up garbage/rubbish onto containers.

- Move garbage collection equipment to the prescribed transfer station and then pick up garbage onto the garbage truck.

- Propagate environmental information and increase people’s awareness of environmental protection.

- Clean and place working tools and equipment at the prescribed place.

Table 4:

Unit:  1km

Code

Type of work

Cost items

...

...

...

Standard cost

MT1.04.00

Cleaning curbs and collecting garbage around tree bases, utility poles and manholes

Labor:

- 4/7-grade workers

Shift

0.8

...

...

...

- The standard cost specified in Table 4 is the labor cost for cleaning curbs and collecting garbage around tree bases, utility poles and manholes on roads of special-class cities. With regard to cities of remaining classes, the cost is adjusted by the following factor k:

+ Class-I cities:

+ Class-II cities:

+ Cities of class-III ¸ V:

K = 0.95

K = 0.85

K = 0.80

MT1.05.00. Manually maintaining the cleanliness of alleys

Work contents:

...

...

...

- Move the garbage hand-cart along the alley and ring a bell to loudly inform people of garbage collection.

- Give warning and ensure traffic safety during performance of garbage collection works.

- Collect trash bags along the alley and wait for people to take their garbage to the garbage hand-cart.

- Use the broom and shovel to clean off garbage piles along the alley (if any) onto the garbage hand-cart and move it to the prescribed transfer station.

- With regard to a wide alley with pavement and storm drain, use the broom and shovel to clean the curb, drain and pick up garbage and waste onto the garbage hand-cart; sweep and pick garbage on both pavement and street surface.

- Move garbage collection equipment (garbage hand-carts) to the prescribed transfer station and then pick up garbage onto the garbage truck.

- Propagate environmental information and increase people’s awareness of environmental protection.

- Clean and place working tools and equipment at the prescribed place.

Table 5:

...

...

...

Code

Type of work

Cost items

Unit

Standard cost

MT1.05.00

Maintaining the cleanliness of alleys

Labor:

- 4/7-grade workers

...

...

...

Shift

1.3

Notes:

- The standard cost specified in Table 5 is applied to determination of costs of maintaining the cleanliness of alleys of ≥ 1.5 m in width.

- The standard cost specified in Table 5 is the labor cost for manually sweeping and picking up garbage on alleys of special-class cities. With regard to cities of remaining classes, the cost is adjusted by the following factor k:

+ Class-I cities:

+ Class-II cities:

+ Cities of class-III ¸ V:

...

...

...

K = 0.85

K = 0.80

MT1.06.00. Manually shoveling MSW at the transfer station onto garbage trucks

Work contents:

- Prepare working tools and personal protective equipment.

- Give warning and ensure traffic safety during performance of garbage collection works.

- Rake and shovel garbage from garbage dumpster or garbage pile onto garbage containers for loading into truck, clean around the garbage dumpster or garbage pile and use canvas to carefully cover garbage before transport.

- At the end of the shift, clean and place brooms, shovels and other equipment at the prescribed place.

- Clean and place working tools and equipment at the prescribed place.

...

...

...

Unit:  01 ton of MSW

Code

Type of work

Cost items

Unit

Standard cost

MT1.06.00

Manually shoveling MSW at the transfer station onto garbage trucks

Labor:

...

...

...

Shift

0.70

MT1.07.00. Manually collecting construction waste

Work contents:

- Prepare working tools and personal protective equipment.

- Rake and break up construction waste, shovel it onto the truck, spread it evenly in the bed and carefully cover it by a canvas before transport.

- Clean the place where such construction waste is collected.

...

...

...

Table 7:

Unit:  01 ton of construction waste

Code

Type of work

Cost items

Unit

Standard cost

MT1.07.00

Manually collecting construction waste

...

...

...

- 4/7-grade workers

Shift

0.45

Chapter II

COLLECTING AND TRANSPORTING MSW, CONSTRUCTION WASTE AND SOLID HEALTHCARE WASTE BY MOTOR VEHICLES

MT2.01.00. Collecting and picking up MSW from hand-carts at the transfer station onto the press pack for transporting to the landfill within an average radius of 20 km

Work contents:

...

...

...

- Operate the press pack to the transfer station.

- Give warning and ensure traffic safety during performance of garbage collection works.

- Gather and load garbage from garbage containers at the transfer station onto the hopper, and then press and move it to the container of the press pack.

- Operate the compacting system.

- Gather and pick up remained garbage onto the press pack.

- Operate the press pack to the following transfer station and repeat the procedures mentioned above to pick up garbage onto the press pack.

- Operate the press pack to the landfill.

- Move the press pack on the weighbridge to determine its dead weight, control the press pack to the tipping face or working front, and then unload garbage at the prescribed site in the landfill.

- Before controlling the press pack to leave the landfill boundaries, move it to the wheel-cleaning facility and return to the weighbridge for re-weighing it without load (in order to determine the weight of garbage carried).

...

...

...

- At the end of the shift, clean and transfer the press pack and working tools to in-charge personnel.

Table 8:

Unit:  01 ton of MSW

Code

Type of work

Cost items

Unit

Standard cost

Vehicle of £ 5 tons

...

...

...

Vehicle of ³ 10 tons

MT2.01.00

Collecting and picking up MSW from hand-carts at the transfer station onto the press pack for transporting to the landfill within an average radius of 20 km

Labor:

- 4/7-grade workers

Shift

...

...

...

0.168

0.131

0.093

Machinery:

...

...

...

Shift

0.0840

0.0653

0.0466

...

...

...

01

02

03

Notes:  In case of change in the average radius for garbage collection and transport, the standard labor and machinery costs specified in Table 8 shall be adjusted by the following factor k:

Radius L (km)

Factor k

L ≤ 15

...

...

...

20 < L ≤ 25

25 < L ≤ 30

30 < L ≤ 35

35 < L ≤ 40

40 < L ≤ 45

45 < L ≤ 50

50 < L ≤ 55

55 < L ≤ 60

60 < L ≤ 65

...

...

...

1.00

1.11

1.22

1.30

1.38

1.45

1.51

1.57

1.62

...

...

...

MT2.02.00. Collecting MSW from garbage bins for transporting to the landfill within an average radius of 20 km

Work contents:

- Prepare the press pack, working tools and personal protective equipment.

- Operate the press pack to the garbage collection site.

- Give warning and ensure traffic safety during performance of garbage collection works.

- Pick up garbage from garbage bins, or acceptable waste containers, on the pavement or the waste storage site of a health facility onto the hopper of the press pack, and then press and move it to the container of the press pack.

- Operate the compacting system.

- Gather and pick up remained garbage onto the press pack.

- Operate the press pack to the following garbage collection site and repeat the procedures mentioned above to pick up garbage onto the press pack.

...

...

...

- Move the press pack on the weighbridge to determine its dead weight, control the press pack to the tipping face or working front, and then unload garbage at the prescribed site in the landfill.

- Before controlling the press pack to leave the landfill boundaries, move it to the wheel-cleaning facility and return to the weighbridge for re-weighing it without load (in order to determine the weight of garbage carried).

- Operate the press pack to the prescribed parking lot.

- At the end of the shift, clean and transfer the press pack and working tools to in-charge personnel.

Table 9:

Unit:  01 ton of MSW

Code

Type of work

Cost items

...

...

...

Standard cost

Vehicle of ≤ 5 tons

Vehicle of > 05 - 10 tons

Vehicle of ³ 10 tons

MT2.02.00

Collecting MSW from garbage bins on pavement and waste storage sites of health facilities for transporting to the landfill within an average radius of 20 km

Materials and supplies:

- Plastic garbage bins

...

...

...

0.0044

0.0044

0.044

Labor:

- 4/7-grade workers

...

...

...

0.278

0.198

0.188

Machinery:

- Press pack

...

...

...

0.1748

0.1309

0.098

...

...

...

01

02

03

Notes:  In case of change in the average radius for garbage collection and transport, the standard labor and machinery costs specified in Table 9 shall be adjusted by the following factor k:

Radius L (km)

Factor k

L ≤ 15

15 < L ≤ 20

20 < L ≤ 25

...

...

...

30 < L ≤ 35

35 < L ≤ 40

40 < L ≤ 45

45 < L ≤ 50

50 < L ≤ 55

55 < L ≤ 60

60 < L ≤ 65

0.95

1.00

...

...

...

1.22

1.30

1.38

1.45

1.51

1.57

1.62

1.66

MT2.03.00. Transporting MSW by hooklift trucks within an average collection and transport radius of 20 km

...

...

...

- Prepare the hooklift truck, working tools and personal protective equipment.

- Operate the hooklift truck to the garbage collection site.

- Give warning and ensure traffic safety during performance of garbage collection works.

- Shovel garbage onto the hooklift truck until it is full, keep garbage loaded on the truck neatly organized and carefully covered before transport.

- Gather and pick up remained garbage onto the hooklift truck.

- Operate the hooklift truck to the landfill.

- Move the hooklift truck on the weighbridge to determine its dead weight, control it to the tipping face or working front, and then unload garbage at the prescribed site in the landfill.

- Before controlling the hooklift truck to leave the landfill boundaries, move it to the wheel-cleaning facility and return to the weighbridge for re-weighing it without load (in order to determine the weight of garbage carried).

- Operate the hooklift truck to the prescribed parking lot.

...

...

...

Table 10:

Unit:  01 ton of MSW

Code

Type of work

Cost items

Unit

Standard cost

Vehicle of < 10 tons

Vehicle of  ≥ 10 tons

...

...

...

Transporting MSW by hooklift trucks within an average collection and transport radius of 20 km

Labor:

- 4/7-grade workers

Shift

0.056

0.04

...

...

...

- Hooklift trucks

Shift

0.056

0.04

...

...

...

01

02

Notes:  In case of change in the average radius for garbage collection and transport, the standard labor and machinery costs specified in Table 10 shall be adjusted by the following factor k:

Radius L (km)

Factor k

L ≤ 15

15 < L ≤ 20

20 < L ≤ 25

...

...

...

30 < L ≤ 35

35 < L ≤ 40

40 < L ≤ 45

45 < L ≤ 50

50 < L ≤ 55

55 < L ≤ 60

60 < L ≤ 65

0.95

1.00

...

...

...

1.22

1.30

1.38

1.45

1.51

1.57

1.62

1.66

MT2.04.00. Cleaning MSW bins

...

...

...

- Prepare working tools and personal protective equipment.

- Move working tools and equipment to the garbage bin site.

- Arrange empty garbage bins neatly.

- Use rag, scrub brush and washing powder, or specialized trash bin cleanser, to scrub and rinse the bin.

- Dry both outside of the bin, and then spray its inside with deodorizer.

- Repeat the procedures mentioned above to clean other dirty MSW bins until the end of the working shift.

- At the end of the shift, clean and transfer working tools and equipment to in-charge personnel.

Table 11:

Unit:  100 MSW bins

...

...

...

Type of work

Cost items

Unit

Standard cost

MT2.04.00

Cleaning MSW bins

Labor:

- 3.5/7-grade workers

...

...

...

1.90

MT2.05.00. Collecting and transporting healthcare waste and pathological waste originated from health facilities to treatment facilities within an average radius of 65 km

Work contents:

- Prepare working tools and personal protective equipment.

- Operate the garbage collection vehicle to the garbage collection site.

- Remove plastic containers containing healthcare waste and pathological waste to the outside of a hospital or health facility for weighing and loading onto the garbage collection vehicle.  Move clean and empty waste bins or containers to their positions.

- With regard to cardboard containers, put up and seal the cardboard container with adhesive tape; move healthcare waste/ pathological waste from normal waste bins to cardboard containers, weigh every sealed cardboard container and then move it into the vehicle.  

- Collect all healthcare waste/ medical waste.

...

...

...

- Operate the vehicle to the prescribed treatment facility; unload waste for delivering to the in-charge warehouse-keeper. Record types and amounts of delivered healthcare waste/ pathological waste.

- Perform duties until the end of the working shift.

- At the end of the shift, clean and transfer vehicle, working tools and equipment to in-charge personnel.

Table 12:

Unit:  01 ton of healthcare waste/ pathological waste

Code

Type of work

Cost items

Unit

...

...

...

Plastic container

Cardboard container

MT2.05.00

Collecting and transporting healthcare waste and pathological waste originated from health facilities to treatment facilities

Labor:

- 4/7-grade workers

Shift

...

...

...

3.91

^Machinery:

- Covered truck of 1.5 ton

Shift

1.63

...

...

...

01

02

Notes:  In case of change in the average radius for waste collection and transport, the standard labor and machinery costs specified in Table 12 shall be adjusted by the following factor k:

Radius L (km)

Factor k

...

...

...

40 < L ≤ 50

50 < L ≤ 60

60 < L ≤ 70

70 < L ≤ 80

0.65

0.80

0.95

1.00

1.05

...

...

...

Work contents:

- Prepare working tools and personal protective equipment.

- move the truck and working tools to the construction waste collection site.

- Give warning and ensure traffic safety during performance of waste collection works.

- Shovel construction waste onto the truck body.

- Gather and scoop up remained waste onto the truck.

- Operate the truck to the following waste collection site and repeat the procedures mentioned above to collect waste until the truck is full.

- Rake and make construction waste on the truck flat, and have the load covered with firmly secured canvas.

- Operate the truck to the landfill.

...

...

...

- Before controlling the truck to leave the landfill boundaries, move it to the wheel-cleaning facility and return to the weighbridge for re-weighing it without load (in order to determine the weight of construction waste carried).

- Operate the truck to the prescribed parking lot.

- At the end of the shift, clean and transfer the truck, working tools and equipment to in-charge personnel.

Table 13:

Unit:  01 ton of construction waste

Code

Type of work

Cost items

Unit

...

...

...

1.2 tons

2 tons

4 tons

MT2.06.00

Collecting and transporting construction waste by dump truck from transfer stations to the landfill within an average radius of 10 km

Labor:

- 4/7-grade workers

Shift

...

...

...

0.596

0.596

0.596

Machinery:

- Dump truck

Shift

...

...

...

0.247

0.149

0.114

...

...

...

02

03

Notes:  In case of change in the average radius for waste collection and transport, the standard labor and machinery costs specified in Table 13 shall be adjusted by the following factor k:

Radius L (km)

Factor k

L ≤ 10

10 < L ≤ 15

15 < L ≤ 20

20 < L ≤ 25

...

...

...

1.18

1.40

1.60

MT2.07.00. Mechanically loading MSW at transfer stations

Work contents:

- Prepare working tools and personal protective equipment.

- Operate the loader and working tools to the transfer station.

- Operate the loader to pile up and keep MSW neatly organized.

- Operate the loader to load MSW onto the dump truck until it is full.

...

...

...

- Operate the loader to load MSW onto other dump trucks until the end of the working shift.

- At the end of the working shift, clean and transfer the loader and working tools to in-charge personnel.

Table 14:

Unit:  01 ton of MSW

Code

Type of work

Cost items

Unit

Standard cost

...

...

...

Mechanically loading MSW at transfer stations

Labor:

- 4/7-grade workers

Machinery:

- Loader with capacity of 16T/ hour

Shift

Shift

...

...

...

0.0089

0.0089

MT2.08.00. Mechanically loading construction waste at transfer stations

Work contents:

- Prepare the loader, working tools and personal protective equipment.

- Move the loader and working tools to the construction waste transfer station.

- Operate the loader to pile up and keep construction waste neatly organized.

- Operate the loader to load construction waste onto the dump truck until it is full.

...

...

...

- Operate the loader to load construction waste onto other dump trucks until the end of the working shift.

- At the end of the working shift, clean and transfer the loader and working tools to in-charge personnel.

Table 15:

Unit:  01 ton of construction waste

Code

Type of work

Cost items

Unit

Standard cost

...

...

...

Mechanically loading construction waste at transfer stations

Labor:

- 4/7-grade workers

Machinery:

- Loader with capacity of 16T/ hour

Shift

Shift

...

...

...

0.0071

0.0071

MT2.09.00. Transporting construction waste by truck within an average radius of 20 km

Work contents:

- Prepare the truck, working tools and personal protective equipment.

- Move the truck and working tools to the construction waste collection site.

- When the truck is full of construction waste, keep waste loaded on the truck neatly organized and carefully covered before transport.

- Gather and scoop up remained construction waste onto the truck.

...

...

...

- Move the truck on the weighbridge to determine its dead weight, control it to the tipping face or working front, and then unload construction waste at the prescribed site in the landfill.

- Before controlling the truck to leave the landfill boundaries, move it to the wheel-cleaning facility and return to the weighbridge for re-weighing it without load (in order to determine the weight of construction waste carried).

- Operate the truck to the prescribed parking lot.

- At the end of the shift, clean and transfer the truck, working tools and equipment to in-charge personnel.

Table 16:

Unit:  01 ton of construction waste

Code

Type of work

Cost items

...

...

...

Standard cost

Truck of < 10 tons

Truck of  ≥ 10 tons

MT2.09.00

Transporting construction waste by truck within an average radius of 20 km

Labor:

- 4/7-grade workers

Shift

...

...

...

0.052

0.034

Machinery:

- Truck

Shift

0.052

...

...

...

0.034

01

02

Notes:  In case of change in the average radius for garbage collection and transport, the standard labor and machinery costs specified in Table 16 shall be adjusted by the following factor k:

Radius L (km)

...

...

...

L ≤ 15

15 < L ≤ 20

20 < L ≤ 25

25 < L ≤ 30

30 < L ≤ 35

35 < L ≤ 40

40 < L ≤ 45

45 < L ≤ 50

50 < L ≤ 55

...

...

...

60 < L ≤ 65

0.95

1.00

1.11

1.22

1.30

1.38

1.45

1.51

...

...

...

1.62

1.66

MT2.10.00. Mechanically cleaning up rubbish from canals

Work contents:

- Prepare the cleaning boat, working tools and personal protective equipment.

- Move the cleaning boat and working tools to the rubbish collection site.

- Workers use dip nets to fish rubbish and use stick to push rubbish to the operating range of the containment boom of the cleaning boat.

- Fasten the mesh bag when it is full of rubbish, hook and pick up the mesh bag onto the boat, repeat such procedures to collect rubbish.

- Take the mesh bag to the receiving place and take rubbish to the container.

...

...

...

- At the end of the working shift, control the cleaning boat to the prescribed terminal, clean and transfer the boat and working tools to in-charge personnel.

Table 17:

Unit:  10,000 m² (water surface)

Code

Type of work

Cost items

Unit

Standard cost

24CV

...

...

...

MT2.10.00

Mechanically cleaning up rubbish from canals

Labor:

- 4/7-grade workers

Shift

0.741

...

...

...

Machinery:

- Cleaning boat with capacity of 24CV

Shift

0.185

-

- Cleaning boat with capacity of 4CV

...

...

...

-

0.833

01

02

Chapter III

...

...

...

MT3.01.00. Operating MSW landfill with capacity of ≤ 500 tons/day

Work contents:

- Prepare working tools and personal protective equipment.

- Carry out procedures for receiving MSW, direct the truck operator to drive the truck on the weighbridge, properly record weighing results and instruct the truck operator to unload MSW at the prescribed place.

- Remove and rake MSW from the truck, ensuring that the truck is empty of MSW before leaving the landfill boundaries.

- Instruct the truck operator to drive the truck to leave the landfill in a safe manner to avoid collision and getting bogged down.

- Spread and compact MSW so that other trucks may unload MSW.

- Spray effective microorganisms (EM), deodorize with Bokashi substance and spray water to prevent dust.

- Cover every layer of leveled MSW with a layer of soil, and compact it before discharging another layer of MSW.

...

...

...

- Spread and compact MSW discharged at the landfill until ending the working shift.

- Sweep and wash the path (outside the landfill) to the landfill.

- Sweep and clean working front, weighbridge and wheel-cleaning facility areas.

- Maintain trees around the landfill.

- At the end of the working shift, level the landfill site, ensure the drainage gradient and consolidate the road surface so that trucks can safely enter the landfill.  At the end of the working shift, clean and transfer the working tools and equipment to in-charge personnel.

Technical requirements;

- Thickness of a MSW layer after compacting is 2m.

- Thickness of the layer of soil covering the MSW layer is 0.15 m – 0.2 m.

Table 18:

...

...

...

Code

Type of work

Cost items

Unit

Standard cost

MT3.01.00

Operating MSW landfill with capacity of ≤ 500 tons/day

Materials:

- Powdered lime

...

...

...

- Flies killing chemical

- Secondary EM

- Bokashi

Labor:

- 4/7-grade workers

Machinery:

- Bulldozer with capacity of 170 CV

- Tank with capacity of 6 m³

-  Gas powered water pump with capacity of 5 CV

...

...

...

Ton

m³

Liter

Liter

Kg

Shift

Shift

...

...

...

Shift

0.00026

0.210

0.00204

0.400

0.246

0.060

...

...

...

0.0025

0.0020

0.0010

MT3.02.00. Operating MSW landfill with capacity of > 500 tons/day – 1,500 tons/day

Work contents:

- Prepare working tools, facilities and personal protective equipment.

- Record weighing results and instruct trucks to unload MSW at the prescribed places.

- Remove and rake MSW from the truck, ensuring that the truck is empty of MSW before leaving the landfill boundaries. Inspect external appearance of waste to determine whether it is acceptable or not.

- Instruct the truck operator to drive the truck to leave the landfill in a safe manner to avoid collision and getting bogged down.

...

...

...

- Cover every layer of leveled MSW with a layer of soil, and compact it before discharging another layer of MSW.

- Apply powdered lime and other chemicals to kill mosquitoes.

- Spray effective microorganisms (EM) for deodorization and spray water to prevent dust.

- Spread and compact MSW discharged at the landfill until ending the working shift.

- Sweep and wash paths (outside the landfill) to the landfill.

- At the end of the working shift, level the landfill site, ensure the drainage gradient and consolidate the road surface so that trucks can safely enter the landfill.

- At the end of the working shift, clean and transfer the working tools and equipment to in-charge personnel.

Technical requirements;

- Landfill leachate treatment system is operated according to biological methods.

...

...

...

Table 19:

Unit:  01 ton of MSW

Code

Type of work

Cost items

Unit

Standard cost

MT3.02.00

Operating MSW landfill with capacity of > 500 tons/day – 1,500 tons/day

...

...

...

- Powdered lime

- Waste-cover soil

- Flies killing chemical

- Secondary EM

- Bokashi

Labor:

- 4/7-grade workers

Machinery:

- Bulldozer with capacity of 170 CV

...

...

...

- Gas powered water pump with capacity of 5 CV

- Electric water pump with capacity of 5 KW

Ton

m³

Liter

Liter

Kg

...

...

...

Shift

^Shift

Shift

Shift

0.00025

0.15000

0.00041

...

...

...

0.24600

0.047

0.0025

0.0002

0.0010

0.0005

MT3.03.00. Operating sanitary MSW landfill with capacity of 1,500 tons/day – 3,500 tons/day

...

...

...

- Prepare working tools, facilities and personal protective equipment.

- Record weighing results and instruct waste collection trucks to unload MSW at the prescribed places.

- MSW is disposed of at the sanitary landfill by adopting the area method. The layer thickness is 2m. Especially, the first waste layer must form a path to the bottom of the sanitary landfill.  Instruct the operator of the waste collection truck to drive it to enter and leave the landfill in a safe manner to avoid collision and getting bogged down.

- Waste collection trucks unload waste in piles at the position assigned by the landfill worker. Waste is spread evenly by a bulldozer and then compacted by a landfill compactor for 8 – 10 times to create stiff layers of waste.

- The landfill surface area is evenly spread by bulldozers so that waste collection trucks may easily move.

- After a completely compacted waste layer is formed in conformity with relevant technical standards, soil is recommended thoroughly on the top and exposed sides of the waste layer. Successive layers of MSW are built up after the soil is spread evenly over the waste surface and thoroughly compacted.

- Examine and level the landfill areas prone to surface subsidence or land slip; ensure the final soil cover even, the slope and repair road surface.

- Waste is treated with Enchoice and Bokashi according to the prescribed technical procedures.

- Ensure the ventilation of gas from both new and old cells.

...

...

...

- Build a dike or levee around the landfill to protect the landfill site, and build road to improve the access to the landfill.

- Apply chemicals thoroughly over the landfill site and surrounding residential areas according to the prescribed technical procedures; apply powdered lime at required positions to prevent flies and mosquitoes.

- Pick up garbage and clean the path to truck parking lot, and spray water to prevent dust at the landfill site and path to the landfill.

- Clean working facilities and tools, and move the truck to the wheel-cleaning facility before leaving the landfill boundaries as prescribed.

Technical requirements;

- The landfill operates according to specific technical requirements and has a landfill leachate treatment system adopting the biological method.

- Thickness of a completely compacted MSW layer is 2m.

Table 20:

Unit:  01 ton of MSW

...

...

...

Type of work

Cost items

Unit

Standard cost

MT3.03.00

Operating sanitary MSW landfill with capacity of 1,500 tons/day – 3,500 tons/day

Materials and supplies:

- Powdered lime

- Waste-cover soil

...

...

...

- Enchoice

- Bokashi

- Aggregate chippings

- Stone 4x6

- Tarpaulins

- Raw water

- D100 plastic pipes

- D21 rubber pipes

Labor:

...

...

...

Machinery:

- Bulldozer with capacity of 220 CV

- Compactor with capacity of 290 CV

- Digger

- Roller with capacity of 10 T

- Tank with capacity of 10 m³

- Truck of 2T

- Truck of 10T

- Electric water pump with capacity of 3 KW

...

...

...

Kg

m³

Liter

Liter

Kg

m³

m³

m²

...

...

...

md

md

Shift

^Shift

Shift

Shift

Shift

...

...

...

Shift

Shift

Shift

Shift

0.001

0.260

0.00206

0.0025

...

...

...

0.0008

0.0020

0.035

0.060

0.001

0.00016

0.070

...

...

...

0.0008

0.00125

0.00002

0.0010

0.00036

0.00242

0.00350

0.00150

MT3.04.00. Treatment of construction waste at the landfill with capacity of < 500 tons/day

...

...

...

- Prepare working tools and facilities, and personal protective equipment.

- Record weighing results and instruct trucks to unload construction waste at the prescribed places.

- Instruct the truck operator to drive the truck to enter and leave the landfill in a safe manner to avoid collision and getting bogged down.

- Bulldozers pile up incoming construction waste unloaded by trucks.

- Spray water daily to prevent dust.

- Spread and level construction waste discharged at the landfill until ending the working shift.

- Sweep and wash paths to the landfill.

- At the end of the working shift, level the landfill site, ensure the slope for water emission and consolidate the road surface so that trucks can safely enter the landfill.

- At the end of the working shift, clean and transfer the working tools and equipment to in-charge personnel.

...

...

...

Unit:  1 tons

Code

Type of work

Cost items

Unit

Standard cost

MT3.04.00

Treatment of construction waste at the landfill with capacity of < 500 tons/day

Labor:

...

...

...

Machinery:

- Bulldozer with capacity of 140 CV

- Water tanker with capacity of 16 m³

Shift

Shift

Shift

...

...

...

0.00185

0.00190

MT3.05.00. Treatment of construction waste at the landfill with capacity of 500 tons/day – 1,000 tons/day

Work contents:

- Prepare working tools and facilities, and personal protective equipment.

- Record weighing results and instruct trucks to unload construction waste at the prescribed places.

- Instruct the truck operator to drive the truck to enter and leave the landfill in a safe manner to avoid collision and getting bogged down.

- Bulldozers pile up incoming construction waste unloaded by trucks.

...

...

...

- Spread and level construction waste discharged at the landfill until ending the working shift.

- Sweep and wash paths to the landfill.

- At the end of the working shift, level the landfill site, ensure the slope for water emission and consolidate the road surface so that trucks can safely enter the landfill.

- At the end of the working shift, clean and transfer the working tools and equipment to in-charge personnel.

Table 22:

Unit:  1 tons

Code

Type of work

Cost items

...

...

...

Standard cost

MT3.05.00

Treatment of construction waste at the landfill with capacity of 500 tons/day – 1,000 tons/day

Labor:

- 3/7-grade workers

Machinery:

- Bulldozer with capacity of 110 CV

- Water tanker with capacity of 7 m³

- Gas powered water pump with capacity of 3CV

...

...

...

Shift

Shift

Shift

Shift

0.0246

0.00366

...

...

...

0.0005

Chapter IV

HEALTHCARE WASTE TREATMENT

MT4.01.00. Treatment of healthcare waste and pathological waste by incinerators

Work contents:

* Incineration of healthcare waste and pathological waste

- Examine safety systems of the incinerator, start its systems and heat the combustion chambers.

- Move plastic or cardboard containers containing healthcare/ pathological waste to the feed chute of the incinerator.

- Clean and put plastic containers at the prescribed positions.

...

...

...

- After every combustion phase, rake ash into two containers placed behind the incinerator’s gate. Spray water to cool ash, put it into plastic bags, and put fastened plastic bags into properly covered containers. Start successive combustion phases. - At the end of the working shift, clean the incinerator parts.

* Burying ash

- Transport ash containers to the burial site in a cemetery.

- Dig a pit for burying ash; use nylon material to line the bottom of the pit for preventing water absorption; apply powdered lime on the surface and level the pit with soil; set up a landmark.

- Have a wash and clean working tools.

Table 23:

Unit:  01 ton of healthcare waste/ pathological waste

Code

Type of work

...

...

...

Unit

Standard cost

MT4.01.00

Treatment of healthcare waste and pathological waste by incinerators

Materials and supplies:

- Gas

- Power supply

- Bicarbonat (NaHCO₃)

- Activated carbon

...

...

...

Labor:

- 4/7-grade workers

Machinery:

- Gas-fueled incinerator

Kg

Kw

Kg

Kg

...

...

...

Shift

Shift

202.0000

199.1000

124.9200

2.00000

...

...

...

8.300

0.1430

Chapter V

MECHANICALLY SWEEPING AND WASHING STREETS

MT5.01.00. Mechanically sweeping streets

Work contents:

- Prepare working tools and equipment, and personal protective equipment.

...

...

...

- Operate the street sweeper within a speed limits of 4km/h - 5km/h.

- When the container is full, discharge waste collected by the street sweeper at the prescribed place.

- At the end of the working shift, clean and place working tools and equipment at the prescribed place.

Table 24:

Unit:  1km

Code

Type of work

Cost items

Unit

...

...

...

MT5.01.00

Mechanically sweeping streets

Materials:

- Sweeper’s brushes

- Clean water

Machinery:

- Street sweeper of 5 – 7 m³

Set

...

...

...

Shift

0.004

0.15